Detailed Product Description

Sticking method:

1.Prepare the necessary tools, such as designing knife, toothpick, needles, cotton pads, hair-dryer, etc.

2.Firstly, stick the paper to the front side of outer cover . Push it using big finger to the cover center, do adjustment, then finish the two sides. During this process, must try to compress it tightly and avoid any bubble or wrinkle presented.

3.In case the bubble presented, use the needles to pick the paper open, re-stick it and use the cotton pads to make it flat.

4.After finished the center pasting, set the four corners and edges by stretching the paper to proper positions. And finally the phone is completely well packed. For this process, we propose that you use hair-dryer to soften the paper for easy pasting, and also need pay attention to avoid damaging paper with too much strength.

5.Then use the designing knife to cut off the excessive part along the ditches (notice: be careful not to shave the phone).

6.To make the sticker more firm, can add a piece of tape at thickness of 2-3mm along the ditches.

7.To make the design better, can also remove the parts which cover the screen and lens using the knife, but need be careful to protect the phone from scratch.

Notes:

1.       This method fits all models of mobile, also MP3, MP4 and digital camera.

2.       Must be very careful when using the knife, to avoid scratch on the screen or phone cover.

3.       Should act slowly and gentlely during the whole process to make sure the product quality.

4.       Can also stick on parts of the phone so that you can get different makeup effects.